For outstanding neutral tone and noise rejection, Mogami Gold TRS-TRS is an excellent interconnect cable for any ¼ " balanced line cable. This cable is a very popular choice for lineout into soundboards and powered speakers.
Gold TRS-TRS (3, 6, 10 or 20 ft)
- Wired with Neglex Studio Quad
- Offers superior clarity and freedom from noise/RF interference
- Terminated with black body, gold contact TRS connectors
- Lifetime warranty
Neglex Quad Microphone Cables
Mogami Neglex quad cable is perfect cable for home studios suffering from wiring and grounding problems. Mogami 2534 should also be used where intense RFI interference is a problem. Mogami 2534 provides an improvement in signal to noise of 10-20db over equivalent twisted pair cables. Double conductors quad cables are more effective in canceling noise that can get past even the best of shields and is critical in an environment of high RF and EM interference.
- Conductor insulation is XLPE ( Cross-Linked Polyethylene) which has excellent electrical characteristics and prevents shrink-back during soldering.
- Served (spiral) Bare Copper Shield is superior to foil or braided shields for sound quality and simplifies termination.
Part No. W2534
Reference Standard NEGLEX Quad High Definition Microphone Cable
NEGLEX No. W2534 has become popular around the world as the standard for high quality digital and analog recording. The cable has also become popular for use with unbalanced equipment, such as high quality pre-amp, amp inputs and tape decks. Miniature Quad Superflexible Microphone Cable Originally designed for BANTAM patch-cords, this cable has become popular where a small diameter Quad mic cable is required.
|No. of Conductor
||0.226mm² (#24 AWG)
||0.15mm² (#26 AWG)
||XLCPE (Cross-Linked Polyethylene)
||Blue / Clear (Quad)
||Black / Red / Blue / Clear
||10 colours available
||5 colours available
||50m (164 Ft)
|50m (164 Ft)
|Weight per 200m Roll
ELECTRICAL & MECHANICAL CHARACTERISTICS
|DC Resistance at 20°C
|Capacitance at 1kHz, 20°C
(Partial C. Value)
See below figure*
|Inductance between conductors at 1kHz. 20°C
|Microphonics at 50KΩ/ Load**
||430m V Max.
||30m V Max.
||Must withstand at DC 500V/15sec.
||100000 M Ω/ × m Min. at DC 125V, 20°C
||Non-emigrant to ABS
||Non-emigrant to ABS
||-20°C‾ +70°C(-4°F‾ +158°F)
|** Using standard testing methods of Mogami Wire & Cable Corp.
||* Partial Capacitance