Language
English
(213) 628-9161
Track You Order
Compare Products
(213) 628-9161

My Cart
All Departments
Shop By Brand

affirmWidget
  • Home
  • JBL PRX710 10" Two-Way Multipurpose Self-Powered

JBL PRX710 10" Two-Way Multipurpose Self-Powered

Out of stock
SKU
PRX710
Be the first to review this product
$749.00
Brand:
Notify me when this product is in stock
Add to Wish List
Email
JBL PRX710 10" Two-Way Multipurpose Self-Powered
Loading...

JBL PRX710 Powered Loudspeaker

  • The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.
  • The PRX710 is comprised of a 10" Differential Drive® woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
  • The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

Features:

  • 133 dB peak SPL
  • 10" Differential Drive® low-frequency driver for low-distortion
    and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Normal and Boost user selectable EQ presets
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphone input capability
  • Professional XLR-1/4" combination inputs, RCA inputs,
    and XLR loop-through
  • Integrated 36 mm pole mount socket
  • Integrated handle with injection molded backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

Specifications:

Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 50 Hz – 19.6kHz
Boost: 42.9 Hz – 20kHz
Frequency Response (±3 dB) : Normal: 63.5 Hz – 18.5kHz
Boost: 53 Hz – 18.6kHz
Coverage Pattern : 100° x 60° nominal
Directivity Index (DI) : 9 dB
Directivity Factor (Q) : 8
Crossover Frequency : 1.9 kHz
Maximum SPL : 133 dB
Signal Indicators : Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
Signal: Green LED indicates signal present
Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 1 x JBL M110-4 250mm (10 in) woofer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point
Transport : 1 x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 498.7 mm x 335.6 mm x 322.3 mm
(19.63 in x 13.21 in x 12.69 in)
Net Weight : 16.4 kg (36 lb)
Write Your Own Review
You're reviewing:JBL PRX710 10" Two-Way Multipurpose Self-Powered
Your Rating
Compare Products
  1. Remove This Item
Compare
Clear All
You have no items to compare.
We can't find products matching the selection.