My Cart

PreSonus FireStudio Project 10x10 FireWire Audio Interface

In stock
SKU
FireStudio Project
$399.00
Brand:
PreSonus FireStudio Project 10x10 FireWire Audio Interface

A Versatile Solution for Small Studios

If you’re like many recording musicians, your studio relies on software effects and a few hardware devices. You need a versatile recording interface with great sound and enough analog inputs and outputs to mic a large drum kit or a small band. We have two words for you: FireStudio™ Project.

The FireStudio Project’s front panel features six mic/line inputs and two mic/instrument inputs, each with high-headroom, sweet-sounding XMAX™ Class A solid-state preamps. That’s easily enough for a small project studio. The two mic/instrument channels even have insert loops so you can add outboard effects.

The FireStudio Project's rear panel sports eight General Purpose outputs and a pair of left/right Main outputs. all on balanced, ¼-inch TRS jacks. The audio source for the Main outputs is the same as that of General Purpose outputs 1 and 2 (DAW Playback 1 and 2, by default). The difference is that the output level of the Main outputs is controlled by the FireStudio Project's front-panel Main volume knob.

Need digital I/O? No problem: FireStudio Project includes stereo S/PDIF. We’ve also included MIDI In and Out. In short, you get all of the connectivity you are likely to need.

Still, as you develop your recording rig, your I/O needs may grow. No problem: you can daisy-chain the FireStudio Project with a second FireStudio Project, or with any interface in the FireStudio family, for up to 52 inputs and outputs. With FireStudio-series interfaces, your rig can expand to match your growing needs.

Clear, Clean, and Complete

At PreSonus, delivering great sound is our primary focus. In addition to XMAX preamps, the FireStudio Project features high-definition, 24-bit digital converters that sample at up to 96 kHz and provide 114 dB dynamic range.

And with PreSonus’ lauded JetPLL™ jitter-elimination technology, you get the tightest, most reliable digital sync in the industry. Translated into plain English, you can rely on clear, clean audio with great imaging.

The FireStudio Project features an internal 18-input software mixer/router that allows you to set up to 5 cue mixes with zero latency. You can set up cue mixes in the included Universal Control control-panel software or in our amazing Studio One® Artist DAW software for Mac® and Windows®, which comes bundled free with all of our interfaces.

Combined with a FireStudio Project interface and your computer, Studio One Artist gives you virtually everything you need to record and mix a project.

Whether your focus is on studio recording, live-sound recording, podcasting, sound design, or all of the above, the FireStudio Project is your complete solution.

Computer system requirements:

Below are the minimum computer-system requirements for the FireStudio Project:

Windows

  • Windows® XP SP3, Vista x64/x32 SP2, Windows 7 x64/x32 SP, Windows 8 x64/x32
  • Intel® Core™ Duo or AMD Athlon™ X2 processor (Intel Core 2 Duo or AMD Athlon X4 or better recommended
  • 2 GB RAM (4 GB or more recommended)

Mac

  • Mac® OS X 10.6.8 or later
  • Intel Core Duo processor (Intel Core 2 Duo or Intel Core i3 or better recommended)
  • 2 GB RAM (4 GB or more recommended)

Windows and Mac Systems

  • FireWire (IEEE 1394) port
  • Internet connection (only for activation)
  • DVD-ROM drive
  • Monitor with at least 1024x768 resolution
  • 20 GB hard-disk space
  • Internal or external 7200 RPM storage drive highly recommended

The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.

Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.

Microphone Preamp

Microphone Preamp

Type XLR Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 1600?
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.003%
EIN (unwtd, 55 dB Gain, 150? Input, 20 Hz to 22 kHz) -126 dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20 Hz to 22 kHz) > 101 dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) > 55 dB
Gain Control Range (± 1 dB) -4 dB to 50 dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +14 dBu
Signal Level LEDs
Red / Clip (±0.5 dBu) +10 dBu (0 dBFS)
Yellow (±0.5 dBu) +4 dBu (-6 dBFS)
Green (±0.5 dBu) -30 dBu (-40 dBFS)
Phantom Power (±2 VDC) +48 VDC

Instrument Input (Channels 1 and 2 only)

Instrument Input (Channels 1 and 2 only)

Type ¼” TRS Female Unbalanced
Input Impedance 1 M?

Line Inputs

Line Inputs

Type ¼” TRS Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 10 K?
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20 Hz to 22 kHz) > 101 dB
Gain Control Range (±1 dB) -16 dB to +16 dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu
Maximum Input Level (Minimum Gain, 1 kHz @ 0.5% THD+N) +22 dBu

Line Outputs (Preamp, General Purpose, and Main Outputs)

Line Outputs (Preamp, General Purpose, and Main Outputs)

Type ¼” TRS Balanced
Output Impedance 51?

Headphone Output

Headphone Output

Type ¼” TRS Active Stereo
Maximum Output 150 mW/ch @ 60? Load
Frequency Response (±1.0 dB) 10 Hz – 70 kHz

Digital Audio

Digital Audio

FireWire (IEEE 1394) Speed 400 Mbps
ADC Dynamic Range (A-wtd, 48 kHz sample rate) 114 dB
DAC Dynamic Range (A-wtd, 48 kHz sample rate) 114 dB
Bit Depth 24
Reference Level for 0dBFS +10 dBu
Internal Sample Frequency Selections 44.1, 48, 88.2, 96 kHz
External Sample Frequency Input S/PDIF
Clock Jitter <20 ps RMS, 20 Hz-20 kHz
Clock Jitter Attenuation >60dB; 1 ns in, approx.1 ps out

Power

Power

Input Connector Type IEC
Input Voltage Range 90 to 230 VAC
Power Requirements (Continuous) 20W

Physical

Physical

Dimensions 1U rackmount
Height 1.75” (44.45 mm)
Depth 7” (177.8 mm)
Width 19” (482.6 mm)
Weight 7 lbs. (3.18 kg)
Write Your Own Review
You're reviewing:PreSonus FireStudio Project 10x10 FireWire Audio Interface
Your Rating