PreSonus Studio 192
Studio 192 Audio Interface/Studio Command Center
Studio 192 Audio Interface/Studio Command Center
Features
General Features
- 26x32, 24-bit, 192 kHz audio interface and studio command center
- Input monitoring with StudioLive® Fat Channel DSP processing on every analog input and the first ADAT inputs
- Integrated zero-latency monitoring
- Speaker switching and talkback
Integrated Software
- Total integration with included Studio One® Artist DAW software (Mac®/Windows®) for multitrack music production, monitor mixing with effects, and studio command features
- Wireless control over preamp levels from free UC Surface touch-control software for iPad® and Android™ tablet and from free Studio One Remote for iPad and Android tablet
- Wired control over preamp levels from free UC Surface touch-control software for Mac and Windows computers
- Compatible with most recording software for Mac and Windows
- Studio Magic Plug-in Suite included
Flexible Connectivity
- Simultaneous I/O up to 26 inputs/32 outputs (8x14 at 192 kHz)
- Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface
- 2 front-panel combo microphone/instrument inputs with XMAX remote controllable mic preamps
- 6 rear-panel combo inputs with XMAX remote controllable mic preamps and balanced, direct-to-ADC line inputs
- Individually switched 48V phantom power
- 8 balanced TRS ¼” outputs for monitor mixing and speaker switching
- ADAT / Dual SMUX Optical inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channel at 88.2 or 96 kHz
- Stereo S/PDIF coaxial input and output
- BNC word clock input and output with low-jitter clocking
Digitalia
- USB 3.0 audio interface
- USB 2.0 compatible
- 24-bit resolution and up to 192 kHz sampling rate
- Top-quality 118 dB A/D/A converters
Physical
- Road-rugged construction with all-metal chassis and metal knobs
- 1U rack-mountable
- 12 VDC external power supply (included)
Computer system requirements:
Below are the minimum computer-system requirements for UC Surface, QMix-UC, and Studio One®.
Mac
- macOS® 10.13 or higher (64-bit only)
- Intel® Core™ i3 processor or better
- 4 GB RAM (8 GB or more recommended)
Windows
- Windows® 10 (64-bit only)
- Intel Core i3 / AMD A10 processor or better
- 4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
- USB-C™ or USB-A 2.0 port compatibility
- 32 GB hard disk space
- PreSonus Universal Control 2.0 or higher
- Monitor with 1366x768 resolution (high-dpi monitor recommended)
- Multitouch-enabled monitor required for touch operation
iOS
- iOS 10 or later
- iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation) (UC Surface)
Android
- Android™ 6.0 (Marshmallow) or later
- Android smartphone (QMix-UC)
- Android tablet (8-inch) with 1024x768 resolution (UC Surface)
Microphone Preamp
Type: XLR Female (via Combo), Balanced Remote
Maximum Input level (min. gain, 1 [email protected]% THD+N) :+12 dBu, ±0.5 dB
Gain Control Range: 60 dB, ±1 dB
Frequency Response (A-D): 10 Hz to 40 kHz, ±0.2 dB
Dynamic Range (min. gain, a-wtd): > 110 dB
Dynamic Range (mid. Gain, unwtd): > 105 dB
THD+N (min. gain, a-wtd): < 0.005%
Input Impedance: 1.6 kΩ
EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd): < 128 dBu
Common Mode Rejection Ratio (1 kHz, +55dB gain): > 55 dB
Phantom Power: +48V, ±3V, >8 mA per channel
Instrument Inputs
Type: ¼” TS Female (via Combo), Unbalanced
Maximum Input Level (min. gain, 1 [email protected]% THD+N): +16 dBu, ±0.5 dB
Gain Control Range: 60 dB, ±1 dB
Frequency Response (A-D): 20 Hz to 20 kHz, ±0.2 dB
Dynamic Range (min. gain, a-wtd): > 110 dB
Dynamic Range (mid. Gain, unwtd): > 105 dB
THD+N (1 kHz, -1 dBFS, a-wtd): < 0.005%
THD+N (1 kHz, -1 dBFS, un-wtd): < 0.005%
Input Impedance: > 1 MΩ
Crosstalk (1 kHz, channel-to-channel): < -80 dB
Line Inputs
Type: ¼” TRS Female (via Combo), Balanced
Maximum Input Level (min. gain, 1 [email protected]% THD+N): + 18 dBu, +/-0.5 dB
Frequency Response (A-D): 20 Hz to 20 kHz, +/-0.2 dB
Dynamic Range (min. gain, a-wtd): > 114 dB
Dynamic Range (mid. gain, unwtd): > 105 dB
THD+N (1 kHz, -1 dBFS, a-wtd): < 0.005%
Input Impedance: 10 kΩ
Crosstalk (1 kHz, channel-to-channel): < -80 dB
Main and Line Outputs
Type (Line Outputs): ¼” TRS Female, Impedance Balanced
Type (Main Outputs): ¼” TRS Female, Impedance Balanced
Maximum Output Level: +18 dBu, ±0.5 dB
Frequency Response: 20 Hz to 20 kHz, ±0.2 dB
Dynamic Range (a-wtd): > 112 dB
THD+N (1 kHz, -1 dBFS, un-wtd): < 0.005%
Output Impedance: 51Ω
Crosstalk (1 kHz, channel-to-channel): < -80 dB
Headphone Outputs
Type: ¼” TRS Female, Stereo, Unbalanced
Maximum Output Level: 150 mW/channel @ 60Ω
Frequency Response: 20 Hz to 20 kHz, ±0.3 dB
Dynamic Range (a-wtd): > 103 dB
THD+N (1 kHz, -1 dBFS, un-wtd): < 0.005%
Crosstalk (1 kHz, channel-to-channel): < -80 dB
Impedance Working Range: 16Ω to 600Ω
Internal Talkback Microphone
Type: Electret Condenser
Sensitivity: -42 dB
Signal Level LEDs
Signal 1: -50 dBFS
Signal 2: -30 dBFS
Signal 3: -20 dBFS
Signal 4: -10 dBFS
Signal 5: -6 dBFS
Signal 6: -4 dBFS
Signal 7: -2 dBFS
Clip: -0.5 dBFS
Digital Audio
Host Interface: USB 3.0 (backward compatible with USB 2.0)
ADC Dynamic Range (A-wtd, 48 kHz): 118 dB
DAC Dynamic Range (A-wtd, 48 kHz): 118 dB
Bit Depth: 24 bits
Internally Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
ADAT Optical I/O: ADAT/SMUX II formats supported [16x16 (44.1/48 kHz), 8x8 (88.2/96 kHz)]
S/PDIF I/O: RCA female connections, supported up to 96 kHz
Word Clock I/O: BNC connector, 4.5 Vpp @75Ω load
Clock
Jitter: <50 ps RMS (20 Hz – 20 kHz)
Jitter Attenuation: >60 dB (1 ns in => 1 ps out)
Power
External Power Adapter: +12 VDC, 3.0A, center positive
Connector Type: Barrel: 5.5 mm OD, 2.1 mm ID, 9.5 mm length
Physical
Dimensions: 1U rackmount
Height: 1.75” (44.45 mm)
Depth: 5.5” (139.7 mm)
Width: 19” (482.6 mm)
Weight: 4.9 lb. (2.22 kg)
| UPC | 673454003288 |
|---|
